LIN SUSPENSION 50

Dimensions:

500 mm x 125 mm (11.8 in x 4.91 in)

Weight:

0.4 kg (0.9 g)

Certification:

IP20 CE

LIN SUSPENSION 50 is made from Solid brass and available in the following finishes:

060 01 201 12 - Brushed nickel c/w black cable cable
060 01 202 12 - Brushed brass c/w black fabric cable
060 01 209 12 - Black matte c/w black fabric cable
060 01 101 12 - Polished nickel c/w black fabric cable

For ‘off-the-shelf’ Goods purchased through Our Site, the Goods will normally be delivered within one – four weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For ‘customised line’ Goods purchased through Our Site, the Goods will normally be delivered within eight – fourteen weeks after the date of payment receipt unless otherwise agreed or specified during the ordering process.

For more information, please refer to our trade B2B and retail B2C Terms and Conditions.

Before commencing installation, ensure the relevant mains supply has been safely isolated/disconnected. Installation should be carried out by a qualified electrician. Ensure all electrical connections are tight with no loose strands, including factory made connections.

1. Remove the base from the installation bracket.
2. Affix the bracket to the ceiling with 2 screws (hole size max. 4.5 mm, 50 mm apart).
3. Connect the unit to the mains.
4. Fix the unit back on its base and retighten 2 screws on the side.

LAMP INSTALLATION
- Before commencing installation, ensure the relevant mains supply has been switched off.
- Use supplied fabric gloves to prevent any stains on the surface of the lamp.
- Due to the risk of glass fracture, handle the lamp with care!
- Whilst applying pressure, push the socket into the lamp holder into the marked place. Remove the lamp from the lamp holder carefully with both hands.

KAIA Care Instruction and Patination